Thursday, 27 April 2017

Three Small Steps, One Cosmic Card

Hello, I'm back for an extra day this week with a space themed birthday card.

My nephew turns 3 next month and has recently become fascinated with the planets of the solar system. A perfect opportunity for me to make him a space themed card!

Step 1 - the background
I began by creating a galaxy background for my card. I used distress inks and lots of white paint. It was a lot of fun to make!

I white heat embossed a greeting on the galaxy panel. The sentiments in the Lawn Fawn Out Of This World stamp set are brilliant!

Step 2 - the images
I stamped and coloured all the images from the Lawn Fawn Out Of This World stamp set. I fussy cut them out and added Wink of Stella clear glitter to all the planets, and glossy accents to the astronauts helmet and space rocket window.

I used some foam squares behind the rocket but everything else on the card is attached with liquid adhesive.

Step 3 - the slider
I used a die from the Lawn Fawn Slide On Over dies to create a slider element in my card. The die cut piece can be added to the card base to hide the slider better.

I added three layers of foam tape behind the panel, leaving space for a penny to move in the slider. I added two MFT slide discs to the penny for the slider mechanism. To keep things moving smoothly, I covered the edges of the foam with powder to stop the penny sticking, before adding the panel to a card base.

Before adding the astronaut to the slider, I attached some twine behind him, with the other end of the twine attached to the space rocket. 

Three small steps, one cosmic card!

Thanks for joining me. Have a lovely day,

Lawn Fawn Out of This World 
Lawn Fawn Slide on Over
MFT Spin and Slide Discs

Wednesday, 26 April 2017

Rainbow card with My Favorite Things Beautiful Butterflies

Hi everyone, it's Esther here with a rainbow birthday card featuring My Favorite Things Beautiful Butterflies.

I started by blending dye inks round the edge of a panel. I splattered this with water, mopped it up and let it dry. I then die cut it using the largest of the Lawn Fawn Large Stitched Rectangles and set it to one side.

I cut a new panel using the second largest of the stitched rectangles and stamped "Make A Wish" using My Favorite Things Count The Stars. I stuck this at an angle to the rainbow panel.

Finally I stamped, ink splattered and die cut with the matching dies some butterflies from My Favorite Things Beautiful Butterflies. I added these to the card and popped the whole lot on to a top folding card base.

That's all for this week - see you next time and thanks for looking!


Tuesday, 25 April 2017


I love to see all the beautiful blossom on the trees in spring. The changing seasons each have their own beauty, and that inspired my card today.

On a piece of white card, I first used the Lil'Inker Quilted Swirl Stitched pattern die to add some pretty detail before die cutting the tree tops from the MFT Trees in the Forest die-namics. 

I had a similar idea for the tree trunks and branches, using the Lil'Inker stitched woodgrain cover die to add detail first. They ended up being too small to really see the detail of the cover die, but the idea would work well for larger tree dies, I'm sure.

Next, I used MFT inks to add colour to the die cuts. For the winter trees, I kept them white but added some clear glitter to represent snow.

I created four square frames by die cutting two of the Lawn Fawn Stitched Squares together. To add some colour behind the frames, I die cut some squares from a piece of blue MFT watercolour wash paper. 

I layered the frames and background papers, then added them to the card with foam tape. Then I attached the trees to the card with liquid adhesive.

Finally, I stamped a sentiment from the MFT Essential Sentiments stamp set. 

Thanks for joining me today.
MFT Trees in Forest

MFT Watercolour Wash Papers
Lil'Inker Quilted Swirl Die

Monday, 24 April 2017

Baby Popcorn

Hello, I hope you all had a good weekend :)

I have a baby shower gift package to show you today..... it's a bit different and focuses on a play on words to give it that fun element :) I was trying to find an alternative use for the Popcorn Treat Box from Sugar Pea Designs and then the phrase "ready to pop" sparked this idea...

I started by running the die through twice to make the box and then stamped the stripes using the solid stripe in Mama Elephants Basic Borders set. I chose to use a traditional pink ink as the gifts are for our niece who is expecting a baby girl very soon, very exciting as it is the first baby of that generation for our family. I used the dies in the set to cut an oval in pink card and then made a second slightly smaller oval by tracing around the inside of the same die on white card and cutting it out with scissors :)

The phrase is made up using dies from the Popcorn set and Mama Elephants Bella Letters. I have added a die cut nappy pin to provide that extra 'New Baby' touch :)

It's quite a small box but the perfect size for a couple of bibs and a Giftcard.... another option would be the Waffleflower Template Petal Holder die which has a slightly larger base but shorter in height.

To give the gift the extra creative finishing touch I used Lawn Fawns Little Bundle stamp set to decorate a sheet of tissue paper, it is only subtle but I think it sets the small presents off nicely.


Thank you for visiting and I hope this might inspire you to think outside the Popcorn Box!

Jenny x

Sunday, 23 April 2017

Getting The Most From Layering Dies

I thought I'd show off one of the new layering die sets from Altenew today - the layering dies are a new concept from them and you can do a lot with them if you get a bit creative!  There are 3 sets to choose from currently but I went with the floral version today.

For the first card I went for a 70s vibe on my colours and cut Plate A from orange card stock, Plate B from lemon and then cut some more card from a darker yellow to sit just behind the flowers.   This is easy to do, I just drew around the flowers on the die cut of Plate A lightly with pencil and trimmed just inside the lines with scissors.  Doing that means you get some variation in colour between the flowers and leaves as the green background layer shows through the leaves and gaps but not the flowers.

For the second card I went for a more simple look - just simply cutting plate A from dark pink pearl card and plate B from lighter pink - but this time I snipped off the leaves so only the flowers were used.  This gives you a nice "gap" in the middle to tuck in a sentiment. I used one from the ever versatile Birthday Messages by Hero Arts.

The third example is actually going to be my Mum's birthday card so I went all out for a more detailed example using layers of copic colouring.

I die cut plate A from black pearl card stock and then cut plate B from white and had another sheet of the white to hand for the base layer.  To get the shading on the petals I simply flicked some dark pink away form the "holes" in the floral layer of the die cut plate B, blending into a paler pink towards the end. If you keep laying the Plate A die on top its easy to see where the petals are.

To get the colour in the correct place on the base layer is a little more tricky - except if you use the die as a stencil ;-)  Cut Plate B from thin paper and secure it to the base layer.  You can then easily apply colour through the holes so you know its where it needs to be (you could do the same thing with plate A to colour Plate B if you find it easier)   Here's what the stencil colouring looks like half way done.

For the final card I experimented with double-debossing to see if it would work and it does!  I simply ran both dies through my machine using a sandwich with a rubber matt so they would deboss the pattern but not cut.  Just do it one after the other on thick card stock using the cutting frame around the edge to line them up.  I blended some oil pastels gently over the top (think brass rubbings!) to make the debossed lines pop.


  • We have now received the new release from Sugar Pea Designs and will get it added to the store as soon as we can.
  • There are several new releases pending for early May from Neat and Tangled, Lil' Inker Designs, Waffle Flower Crafts and of course the regular monthly release from MFT.
  • Lawn Fawn have just announced a list of retired products ahead of a new release in late late May.  We will add the retired products to our discontinued page in the coming days - if you want them, grab them now as they won't be coming back!

Saturday, 22 April 2017

Critter Gift Boxes

Hey stampers, Anni here,

From time to time we all need a gift box to give away not so romantic gifts as money - for teenagers for example. I made some in advance to be prepared.
These are easy to make if you have a die on hand to cut them. I really like Lawn Fawn's Scalloped Treat Box because it has just the right size and is just super cute.
I die cut it two times from patterned paper -  I still have some 12''x12'' papers in my stash from times before they came up with these cute 6''x6'' paper pads. These big sheets are perfect for these boxes.

For the decoration I stamped a fox and a skunk from an all time favorite set called Into the Woods by Lawn Fawn on white paper. I used alcohol markers to colour them and added some highlights with a white gel pen. I also stamped the trunk in brown (it is a solid stamp) and some leaves. I fussy cut all the images (but there are coordinating dies available, too) and arranged them on the box.

For the sentiment I die cut clouds with Lawn Fawn Spring Showers die set from white cardstock. As these gift boxes are supposed to be given away as a birthday presents I stamped Happy Birthday on them (surprise, surprise). I chose a little sentiment from the set  Mini Messages by Mama Elephant. You may have noticed that I use this set a lot. I just like the size of the sentiments in this set.

Thank you for stopping by and have a fun weekend - and make some gift boxes - you never know!


Friday, 21 April 2017

Spreading a little lunar love.

Hi everybody,

Jill here, and this week I've got some sweet little Lunar Animals...

...spreading a little love from My Favourite Things Peek-a-boo Windows Dienamic.

I have eyed this die up for soooo long, but wasn't sure I 'needed' it, (I've been trying to be a good avail), but eventually bit the bullet and treat myself...and now I can't put it down!  It is so simple yet so effective, I absolutely love it and can see me getting so much use from it!  Awesome buy :)

I started by cutting the fabulous Peek-a-boo die and doing a little ink blending on the back card in the areas which would 'peek' through.  I then took the adorable, and one of my all time favourites, Mama Elephant's Lunar Animals and stamped out onto some watercolour card.  I coloured all my images using Zig Real Brush Clean Colour Pens and fussy cut, leaving a neat white border.  I then placed my little Lunar Animals behind the Peek-a-boo die and adhered in place.  

My sentiment and little speech bubbles are from Mama Elephant's Everyday Greetings and are stamped in pale grey ink to keep the card light and bright.  I finished by adding a little heart balloon from Lawn Fawn's Hello Sunshine which is stamped using Zig Pens, and to which I added a piece of thread as the balloon string for a little added cuteness.

 I adhered my top panel over my background using foam tape to add some nice dimension and finished by adding a cute enamel heart.

I really hope you like it.  As always, everything I used is linked below.

See you next week.


Stitched Triple Peek-a-Boo Windows DienamicLunar Animals Image 1Hello Sunshine Image 1

Everyday Greetings Image 1Zig Clean Color Real Brush Pen (12 piece set)